To secure the track to the wall and add support for the heavy barn door cut a 1 x 4 mounting board the same length as but a little wider than the track.
Header board for barn door.
Use the drywall anchors spacers and lag bolts to secure the mounting board.
If you are just using one kit it will be 72 the length of the barn door hardware.
We marked the studs with our stud finder and marked the angle distance of the header board.
I have calculated i need 12 hardware.
1 1x6x4 pine boards.
A 2 x 6 cut twice as long as your track should do the trick.
What i need to know is if the window is surrounded by 3 4 trim and the shutters are 1 and 3 4 thick can i mount the hardware to the wall with enough space to run the shutters back and forth over the window opening or do i absolutely have to.
For door you will need.
The barn door hardware track is 3 16 thick and 1 1 2 wide.
Most of our barn door hardware accommodates up to 1 50 thick door but a header board to push the track away from wall more to allow clearance can be used if you have thicker doors.
Barn doors can be heavy up to 200 pounds or more so for sturdiness most people mount the track to a header attached to the wall studs above the doorway.
7 1x6x8 pine boards.
The barn door should be wide enough to completely cover the doorway with an inch or two of overhang on both sides and about one inch at the top.
Let s get into this.
Mounting over a bay window.
It is advised not to install the track directly into the drywall so we first needed to install a header board above our door opening.
Yours might be different.
That s what this 36 door will be replacing.
Sliding barn door support header header height 6 header thickness 3 4 for the most up to date lead times and shipping info on this product click here.
Then we cut our 1 6 header board to length for us the length was the width of the wall.
I am mounting shutters using the same hardware used for barn door sliders.
The hardware kit does not come with the supplies you will need to install a header board so you will have to get the piece of wood and interior screws separately.
In this project the mounting board was painted black and the edges rounded slightly for a more finished appearance.
3 1x8x6 pine boards.
First we used our laser level and marked 2 above the door opening.
How thick and wide is the barn door hardware track.
Work with a helper when lifting heavy pieces or standing on a step ladder during this diy.
It should be tall enough so that when it s hung on the track there is about 1 2 inch of space between the bottom of the door and the floor.